Current location：Home > Product > Belt sliding table > GSP Series > GSP14 > Lower Right

Lightweight and Long Lifespan

Repeatability：±0.04mm

Horizontal Load：25kg

Lead：40mm

Maximum Speed：2000mm/s

Stroke Pitch：100-3650mm

Set the motor acceleration and deceleration to0.2seconds.

The standard specifications cannot be applied for the use of inverted cranes. If you have any requirements, please contact us by phone or leave a message online.

Delivery time: 7-10 days

PDF

3D download

Cadenas3 Ddownload

The advantages of four row ball bearings

High rigidity, high precision, low friction, high-speed motion, high load capacity, long life, no gaps, light and agile movement, and easy to maintain high precision for a long time when moving to the "arc groove". It can achieve the same rated load in all four directions of the inner slider, and can be used in any direction

Both sides can be filled with oil

The fuel nozzle design consists of a single fuel nozzle on the slide, which allows for simultaneous lubrication and maintenance of both the slide rail and slider, making maintenance and repair more convenient and time-saving. Self developed integration, oil storage system, cost saving and efficiency improvement.

Excellent torque performance

Complete styles - many advantages

With steel belt protection, it can prevent foreign objects from directly falling into the slide table and reduce dust generation. It can be used in clean room environments and can be equipped with motors and installation methods from different manufacturers.

Ordering Method

GSP14 - L40- 100-L -M20 -C 4 - 0001

Specification

Spec	Repeatability(mm)		±0.04
	Lead (mm)		40
	Maximum Speed (mm/s)		2000
	Maximum Payload	Horizontal (kg)	25
		Vertical (kg)	-
	Rated Thrust (N)		100
	Stroke Pitch (mm)		100-3650mm/50mm Pitch
Parts	AC Servo Motor Power (W)		200W
	Ball Width (mm)		22
	High Rigidity LinearGuide(mm)		Ball Screw Actuator
	Home Sensor	Outside	EE-SX672(NPN)

Sensor Layout

Allowable Overhang

(Unit : mm)

Horizontal Installation	A	B	C
10kg	300	200	450
18kg	200	100	300
25kg	150	50	200

(Unit : mm)

Wall Installation	A	B	C
10kg	450	200	350
18kg	200	150	200
25kg	250	80	150

Static Loading Moment

(Unit : Nm)

MY	660
MP	660
MR	550

*The torque value in the chart indicate the center of gravity.

*Operation life is 10,000km when the product is using under the specified conditions.

*Data information is not for ceiling-mount inverse use. Contact us for the details if you want to apply ceiling-mount inverse usage.

Spec Index of Electric Actuator

Use Where	Driven Mode	Model Specification	Reducer Mechanism	Motor Output (w)	Width (mm)	Height of the body(mm)	Repeatability (mm)	Belt spec		Maximum Payload(kg)		Maximum speed (mm/s)*1
Use Where	Driven Mode	Model Specification	Reducer Mechanism	Motor Output (w)	Width (mm)	Height of the body(mm)	Repeatability (mm)	Belt width(mm)	Lead(mm)	Horizontal	Vertical	Maximum speed (mm/s)*1
Standard	Balt	GSP14	Yes	200W	135	78	±0.04	22	40	25	-	2000
		GSP17	Yes	400W	170	90	±0.04	28	40	45	-	2000
		GSP20	Yes	750W	200	112	±0.04	50	40	85	-	2000